Chemical range

MarClean SC

A well proven environmentally friendly multi-purpose cleaner

Multipurpose Alkaline Cleaner

Highly concentrated, non-caustic cleaning and degreasing agent. Free from hydrocarbon solvents. Based on the latest and most powerful biodegradable surface-active and emulsifying agents. TANKERS: For removal of inert gas soot, cleaning of mineral oils, petroleum products, palm, vegetable and animal oils. Safe to use for manual spot cleaning and degreasing. DRYBULK: For cleaning after coal and petcoke.


pH 12,5-13 

Dosage: 0,5-3% for Tankers; 5-10% for Drybulk
IMO Approved
Approved by coating manufacturers
MSDS

MarClean XP

Ideal for Zinc Coated tanks

Water based, non-caustic cleaning and degreasing agent. It contains ethoxylates, sulphonates, glycosides and complexing agents. Ideal for cleaning after all types of vegetable oils, animal oils, fats, waxes, luboils and other substances containing hydrocarbons. Safe on zinc coating and for manual cleaning.


pH 10,8

Dosage 1-5%
IMO Approved
Approved by coating manufacturers
MSDS

MarClean MB40 - MarClean MB40 Cement Remover

Metal Bright

Phosphoric and oxalic acidic solution with alcohol-etoxylates for rust and stain removal. Brightens aluminium, copper and stainless steel. Removes white residues from fatty acids, caustic soda and lime residues. The Cement Remover is specifically designed for effective removal of cement,clinker, ore and gypsum in DRYBULK cargo holds


pH >1
Dosage 0,5-3%
IMO Approved
Approved by coating manufacturers
MSDS

MarClean RC

Rig Clean

User-friendly, general purpose cleaning and degreasing agent. Free from hydrocarbon solvents and caustic soda. Cleans heavily soiled surfaces on oil installations, drilling decks, equipment and engine rooms. Designed for manual and high pressure washing both on and offshore. Meets the strict environmental requirements of the Norwegian Oil Sector in the North Sea.


pH 12,5-13
HOCNF Approved
Cons. 16,58%
Cons. 83,42%
Approved by coating manufacturers
MSDS

MarClean H60+

MarClean H60+ is a heavy-duty, low-toxic,biodegradable, solvent-based tank cleaner/degreaser containing emulsifying agents, petroleum solvents, emulsifiers and surfactants. Used as a tank
cleaner/degreaser for the removal of heavy mineral oils andgrease.


pH 8

Dosage 3-6%
High Flash Point
IMO Approved
Approved by coating manufacturers
MSDS

MarClean AC

Marclean AC is an fully biodegradable and non-flammable alkaline NLS Cargo tank cleaner with fast-acting wetting agents. It can be used neat or diluted with water depending on the degree of contamination, type of surface, hardness of water and temperature.
TANKERS: For removal of animal fats and vegetable oil residues (drying/semi drying) and leave no film in the cargo tanks.
It is effective and economical in use. DRYBULK: Effective general cleaner for removal of stains and residues from Coal and Petcoke


pH 13,7

Dosage 1-5%
IMO Approved
Approved by coating manufacturers
MSDS

MarClean AC+

Heavy duty Alkaline cleaner based on potassium hydroxide

Marclean AC+ is an fully biodegradable and non-flammable strong potassium based NLS Cargo tank cleaner in combination with fast-acting wetting agents. It can be used neat or diluted with water depending on the degree of contamination, type of surface, hardness of water and temperature.
TANKERS: For removal of soot, animal fats and vegetable oil residues (drying/semi drying) and leave no film in the cargo tanks.
It is effective and economical in use. DRYBULK: Stronger general cleaner for removal of stains and residues from Coal and Petcoke


pH > 14

Dosage 1-5%
IMO Approved
Approved by coating manufacturers
MSDS

MarClean Soap

Marclean Soap is an biodegradable and non flammable light duty NLS Cargo tank cleaner which contains wetting agents that allow rapid penetration to remove light minerals oil from tank surfaces and leaves surfaces free from residue.
Safe to be used in food areas. It is concentrated and economical in use.


pH 10

Dosage 0,5-1%
IMO Approved
Approved by coating manufacturers
MSDS


MarClean HCR

Hydrocarbon remover

Marclean HCR is used for the removal of Hydrocarbon during NLS Cargo tank cleaning operations to bring tank wall condition up to required wall wash specification.


pH 10

Dosage 2-5%
IMO Approved
Approved by coating manufacturers
MSDS

 

  

  

MarClean Solve

Heavy duty hydrocarbon free tank cleaner

Marclean Solve is an heavy duty NLS Cargo tank cleaner contains no chlorinated hydrocarbons for removal of paraffin’s, lubrication-oils, waxes, crude oil, heavy fuels, fatty acids, vegetable oils and animals fats. Safe to use on all metal surfaces and tank coatings and leave no film in the cargo tanks.
It is effective and economical in use.

MarClean Bleach

Heavy duty water based alkaline tank cleaner

Marclean Bleach is extremely efficient to remove red and/or yellow dye discoloration/stains in cargo tanks in TANKERS caused by carriage of dyed gasoline cargoes. For DRYBULK, use MarClean Bleach for removal of stains after coal, petcoke, bauxite or Fertilizers


MarClean ECO

Multipurpose heavy duty tank cleaning cleaner and hydrocarbonfree cleaner produced from natural raw materials.

Marclean ECO is developed as a concentrated heavy duty tank cleaner which is manufactured from natural raw materials containing no chlorinated or aromatic hydrocarbons, making it an excellent hydrocarbon free cleaner after any cargo. As a multifunctional tank cleaner it replaces most conventional alkaline, solvent & water based tank cleaners.


MarClean GREEN

Effective cleaning agent for removal of luboils, gasolin, hydrocarbon products/chemicals, vegetable oils, phthalates, paraffines and odour-intensive chemicals.

Marclean GREEN is a neutral high cleaning concentrate, free of solvents.

No dangerous good in regulation of transport (land, sea and air).


pH 0,3-1

Dosage 1-5%
IMO Approved
Approved by coating manufacturers
MSDS






pH >11
Dosage 1-3%
IMO Approved
Approved by coating manufacturers
MSDS


 

pH: 10.5-11.5
Dosage 0.1-0.5%
IMO Approved
Approved by coating manufacturers
MSDS



 


  

pH: 7.5-8.5

Dosage 0.2-0.4%
IMO Approved
Approved by coating manufacturers
MSDS

Raw Materials

We supply all conventional raw materials for tank cleaning such as caustic soda, potassium hydroxide, di-water, glycols, acids and solvents.

PH is in concentrate – dosage is for recirculation mixed in fresh water. Depending on location we deliver in 25 l cans, 209 l drums and 1000 l IBC. Safety Data Sheets (MSDS), Protection sheets, Transport incident cards and labels are always available and updated in terms of applicable legislation in our online database.

AttachmentSize
PDF icon MarClean AC+ - MSDS51.22 KB
PDF icon MarClean RC - MSDS367.76 KB
PDF icon MarClean SOAP - MSDS48.95 KB
PDF icon MarClean Green626.43 KB
PDF icon MarClean SC - MSDS195.18 KB
PDF icon MarClean AC229.58 KB
PDF icon MarClean MB 40243.21 KB
PDF icon MarClean HCR355.2 KB
PDF icon MarClean Solve397.31 KB
PDF icon MarClean Bleach202.75 KB
PDF icon MarClean Eco208.69 KB
PDF icon MarClean H60189.66 KB
PDF icon MarClean SC204.9 KB
PDF icon MarClean XP176.42 KB